TM 9-2320-363-34-2
PISTON AND CYLINDER ASSEMBLY REPLACEMENT (CONT)
20.
21.
22.
23.
24.
25.
KEEP CYLINDER LINER REMOVER SHOE (25) IN POSITION ON CYLINDER LINER BOTTOM AND
TURN CYLINDER LINER REMOVER NUT (26) UNTIL IT CONTACTS CYLINDER LINER REMOVER
THRUST BEARING (27).
CONTINUE TIGHTENING UNTIL CYLINDER LINER IS FREE IN
REMOVE CYLINDER LINER AND CYLINDER LINER REMOVER
REMOVE CYLINDER LINER (3) FROM CYLINDER LINER
CYLINDER BLOCK BORE.
FROM BLOCK.
REMOVER (24).
REMOVE AND DISCARD TWO SEAL RINGS (28) AND CREVICE SEAL (29) FROM CYLINDER
LINER (3).
REPEAT STEPS 19 THRU 24 FOR EACH CYLINDER LINER (3) BEING SERVICED.
12-148