TM 9-2320-363-34-2
3.
4.
5.
WITH RIDGE REAMER, REMOVE CARBON RIDGE (2) AT TOP OF CYLINDER LINER (3) ABOVE
UPPER TRAVEL LIMIT OF TOP PISTON RING.
NOTE
Make sure connecting rods and caps are stamped with correct location number.
If not stamped, stamp correct location (1 thru 6) on tang side (cooler side) of rod
cap and rod.
REMOVE TWO CONNECTING ROD CAP NUTS (4), CONNECTING ROD CAP (5), AND LOWER
CONNECTING ROD BEARING SHELL (6).
INSTALL TWO CONNECTING ROD GUIDES (7) ON TWO CONNECTING
PROTECT CRANKSHAFT JOURNAL. PUSH CONNECTING ROD AND PISTON
TOP OF CYLINDER BLOCK (10).
ROD BOLTS (8)
ASSEMBLY (9) THRU
TO
12-143
