TM 9-2320-363-34-2
16. USING PISTON RING PLIERS, REMOVE AND DISCARD FIRE (TOP) AND MIDDLE COMPRESSION
RINGS (21), LOWER OIL CONTROL RING (22), AND OIL CONTROL RING EXPANDER (23) FROM
PISTON DOME (17).
17. REPEAT STEPS 9 THRU 16 FOR EACH PISTON ASSEMBLY BEING SERVICED.
18. ROTATE ENGINE STAND SO ENGINE IS HORIZONTAL AND CYLINDER LINERS (3) ARE UP.
19. CENTER CYLINDER LINER REMOVER (24) OVER CYLINDER LINER (3). POSITION CYLINDER
LINER REMOVER SHOE (25) AT BOTTOM OF CYLINDER LINER (3) WITH LIP ON EACH SIDE
ENGAGING BOTTOM EDGE OF LINER (3).
12-147
