TM 9-2320-363-34-2
13.
14.
EXAMINE OUTSIDE DIAMETER OF LINER FOR FRETTING AT FLANGE AND CYLINDER BLOCK
BORE AREA. IF LIGHT FRETTING IS PRESENT, SURFACE CAN BE RESTORED WITH CROCUS
CLOTH OR FLAT STONE.
MEASURE CYLINDER LINER AS FOLLOWS:
CYLINDER LINER
MINIMUM
in.
(mm)
OUTSIDE DIAMETER (BELOW FLANGE) (A) . . . .
5.864
(148.95)
FLANGE THICKNESS (B) . . . . . . . . . . . . . . . 0.3533
(8.975)
INSIDE DIAMETER (NEW) (C) . . . . . . . . . . . . .
5.118
(130.00)
INSIDE DIAMETER (USED) (C) . . . . . . . . . . . .
OUT-OF-ROUND (INSIDE DIAMETER) . . . . . . . .
TAPER (INSIDE DIAMETER) . . . . . . . . . . . . . .
MAXIMUM
in.
(mm)
LIMITS
in.
(mm)
5.866
(149.00)
0.3543
(9.000)
5.120
(130.05)
5.122
(130.100)
0.001
(0.025)
0.001
(0.025)
12-153
