TM 9-2320-363-34-2
PISTON AND CYLINDER ASSEMBLY REPLACEMENT (CONT)
12.
13.
14.
15.
REMOVE PISTON ASSEMBLY
DOWN ON BENCH.
FROM HOLDING FIXTURE. PLACE PISTON ASSEMBLY DOME SIDE
PUSH PISTON PIN (16) OUT OF PISTON DOME (17) AND PISTON SKIRT (18). SEPARATE SKIRT
(18) FROM DOME (17).
FROM INSIDE OF PISTON DOME (17), PUSH TWO PISTON PIN BUSHING ENDS (19) OUT OF
PISTON PIN BORE AT EACH SIDE OF PISTON DOME (17).
LIFT PISTON PIN BUSHING (20) TO CLEAR RETAINING PIN IN CENTER OF PISTON DOME (17)
AND SLIDE PISTON PIN BUSHING (20) OUT OF PISTON DOME (17).
12-146
