TM 9-2320-363-34-2
PISTON AND CYLINDER ASSEMBLY REPLACEMENT (CONT)
NOTE
Always assemble rods and caps in original positions as marked.
Connecting rod caps are numbered according to cylinder position with matching
numbers stamped on tang side of connecting rod.
6.
ASSEMBLE CONNECTING ROD AND PISTON ASSEMBLY (9), CONNECTING ROD CAP (5), AND
LOWER CONNECTING ROD BEARING SHELL (6).
7.
INSTALL TWO CONNECTING ROD CAP NUTS (4) HAND-TIGHT.
8.
REPEAT STEPS 1 THRU 7 FOR EACH CYLINDER BEING SERVICED.
12-144
