TM 5-2330-325-14&P
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Brake shoe assembly removed (para. 4-47)
Seal (2)
Slack adjuster assembly removed (para. 4-48)
Cleaning compound (item 19, Appendix F)
Brush (item 3, Appendix F)
Gasket
General Safety Instructions:
Tools/Test Equipment:
Dry cleaning solvent is toxic and flammable.
Tool kit, mechanics general,
Avoid prolonged breathing of vapors, avoid
NSN 5180-00-177-7033
skin contact and keep away from open
Shop equipment, common No. 1,
flame.
NSN 4910-00-754-0654
a.
Removal.
CAUTION
Make sure not to damage machined surface of camshaft when removing
retaining ring. Equipment failure could result.
(1)
Expand retaining ring (6) and remove from camshaft (10).
(2)
Remove flat washer (7) from camshaft (10).
(3)
Expand retaining ring (5) and remove camshaft (10), flat washer (2), spider seal (3) and flat
washer (4) from axle spider (1) and cam bracket kit (9). Discard seal.
(4)
Remove four screws (8) from cam bracket kit (9) and remove kit from bracket.
b.
Cleaning.
(1)
Remove dirt and mud with water and brush.
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If solvent gets on skin or clothing, wash immediately with soap
and water.
(2)
Remove grease and oil with cleaning compound and a rag. Dry thoroughly.
(3)
Lubricate in accordance with Appendix I, Lubrication Instructions.
