TM 5-2330-325-14&P
GLADHAND REPLACEMENT.
This task covers:
a. Removal
b. Cleaning
c. Inspection and Replacement
d. Packing Ring Installation
e. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Parked on level ground and brakes engaged.
Packing ring
Cleaning compound (item 19, Appendix F)
Rags (item 15, Appendix F)
Brush (item 3, Appendix F)
General Safety Instructions:
Tools/Test Equipment:
Dry cleaning solvent is toxic and
Tool kit, mechanics general,
flammable.
NSN 5180-00-177-7033
Avoid prolonged breathing of vapors,
avoid skin contact and keep away from
open flame.
a.
Removal.
(1)
Disconnect air line coupling from rear of gladhand coupling.
(2)
Open kingpin stowage box lid and secure in open position
WARNING
Secure kingpin stowage box lid prior to removing gladhands. Failure to do so
may result in serious injury
(3)
Remove three bolts (1), washers (2), and nuts (3) from gladhand (4) and gooseneck.
(4)
Remove gladhand (4) from gooseneck.
b.
Cleaning.
(1)
Clean mud and dirt from all exposed surfaces with water and a brush.
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If solvent gets on skin or clothing, wash immeditaly with soap and
water.
(2)
Remove grease with cleaning compound and a clean rag.
