TM 5-2330-325-14&P
4-47
BRAKESHOE REPLACEMENT (Continued).
b.
Inspection.
(1)
Inspect springs for rust, obvious defects and excessive wear. Replace defective spring.
(2)
Inspect brake shoe lining for wear. If braking surface is within 3/16 in. (.48 cm) of rivet
heads or grease is present, replace brake shoes.
c.
Installation.
(1)
Assemble return spring (8), retainer clips (7), and sleeve bushings (6) to brake shoes (5).
(2)
Position brake shoes (5) on axle spider and complete connection of return spring (8) to
both shoes (5).
(3)
Spread each shoe (5) apart and insert bushings (4), groved pins (3), flat washers (2), and
retaining rings (1).
FOLLOW-ON TASKS:
Install hub and drum assembly (para. 4-61).
Install tire assemblies (para. 3-8).
Adjust slack adjuster (para. 4-48).
4-51
