II106700-7
Rev. -
t. Install four washers (3/8 ID) and locknuts (3/8 16) on the top studs of the
Rear Studplate (P/N 106780-2). Hand-tighten the locknuts.
u. Install four washers (3/8 ID) and locknuts (3/8 16) on the rear bolts through the
Rear Cab Armor Panel.
v. Remove the locknuts loosely securing the Front Studplate (P/N 106780-1) to the
Roof Armor Panel.
w. Install the driver's-side Roof Panel Front Bracket (P/N 106735-1) over the exposed
studs of the Front Studplate (P/N 106780-1) (See Figure 43).
Figure 43. Secure the forward end of the Roof Armor Panel using
the attachment hardware.
x. Attach the driver's-side Roof Panel Front Bracket (P/N 106735-1) to the Studplate
(P/N 106780-1) using six washers (3/8 ID) and six locknuts 3/8 16) (see Figure 43).
Hand-tighten the locknuts.
y. Apply Loctite 242 to five bolts (1/4 20 x 1.500 LG).
z. Install the five prepared bolts (1/4 20 x 1.500 LG) into the bottom of the driver's-side
Roof Panel Front Attachment Bracket (P/N 106735-1) (above the driver's-side
windshield). Torque the bolts to 6 ft-lb.