II106700-7
Rev. -
Figure 37. Side Armor Panel Assembly Attachment.
5.1.9 Install the Roof Armor, Kit P/N 106704-3.
NOTE
Install the Front and Rear Studplates (P/N 106780-1 / -2) through the slots in the
Roof Armor and then loosely install them using locknuts (3/8 16) before lifting the
Roof Armor Panel onto the roof of the HEMTT (see Figures 38 and 39).
a. Install the Escape Hatch Seal (See Figure 40). Align the edge of the seal with
the side edge of the roof hatch opening.
b. Install two Roof Channels (P/N 113347-1) on top of the cab roof using
two bolts (1/4 20 x 1.000 LG), two washers (1/4 ID), and two locknuts
(1/4 20) for each channel. These channels serve as a storage platform for
the escape hatch (see Figure 40a).
