II106700-5
Rev. B
f. Install the top Louvered Grille Panel (P/N 111457-1) into the top slots of the Louvered
Grille Brackets.
g. Secure the Louvered Grille Panels to the Louvered Grille Brackets by installing
five bolts (3/8 16 x 1.500 LG), ten flat washers (3/8 ID), and five locknuts (3/8 16)
through the ends of the passenger-side Louvered Grille Panels. Tighten the locknuts
to 35 ft-lb.
5.1.6 Install the Rear Cab Armor Panels Kit P/N 106702-3
NOTE
See Figure 29a and Paragraph "p" prior to installation.
a. Remove the nut from the Harness Bracket (See Figure 29) and move the spacer to
the rear of the Bracket to clear the mounting of the Rear Cab Armor Panel Bracket.
b. Replace the nut and secure the Harness Bracket.
Figure 29. Move the Harness Bracket to the inside for increased clearance for
the Rear Cab Armor Panel Bracket.
c. Install four Mounting Armor Brackets (P/N 106734) onto the Rear Cab Armor Panel
(P/N 106724-3) (See Figure 30) using 12 washers (3/8 ID), 12 washers (1/4 ID), and
12 locknuts (1/4 20). Tighten the locknuts finger tight.