TM 9-2320-363-34-2
NOTE
If beaded cylinder head gasket is used, install gasket with bead side toward
cylinder head. Unbeaded cylinder head gasket can be installed with either side
up.
Make sure old gasket material is
head and air compressor body.
52. POSITION NEW CYLINDER HEAD GASKET
removed from mating surfaces of
(53) ON DECK OF AIR COMPRESSOR
NOTE
Cylinder head should be positioned with air inlet and discharge flange on
of air compressor body when viewed from rear.
53. POSITION CYLINDER HEAD (33) ON AIR COMPRESSOR BODY (6).
54. INSTALL SIX CAPSCREW HEAD BOLTS (54). TIGHTEN BOLTS TO 300-360 LB-IN.
55. INSTALL KEY (55) ON AIR COMPRESSOR CRANKSHAFT (8), AND POSITION AIR
DRIVE HUB (56) ON AIR COMPRESSOR CRANKSHAFT (8).
cylinder
BODY (6).
left side
(34-41 N.m).
COMPRESSOR
12-138
