TM 9-2320-363-34-2
ACCESSORY DRIVE REPAIR (CONT)
NOTE
Word INSTALL and an arrow are etched on needle bearing installer/remover to
aid in installation. Be sure to place needle bearing identification numbers up
against needle bearing installer/remover.
3.
INSTALL NEW NEEDLE BEARING (5) IN ACCESSORY DRIVE HOUSING (6). USING LONG END OF
SERVICE SET NEEDLE BEARING INSTALLER/REMOVER (7), PRESS NEEDLE BEARING (5) INTO
ACCESSORY DRIVE HOUSING (6) FLUSH TO 0.02 IN. (0.5 mm) BELOW BOTTOM OF OIL SEAL
COUNTERBORE.
12-112
