TM 9-2320-363-34-2
ACCESSORY DRIVE REPAIR (CONT)
11.
12.
13.
INSTALL SERVICE SET HOLDING FIXTURE (10) IN VISE.
NOTE
If necessary, use narrow opening end of service set bearing installer to seat
accessory drive pulley. If pressing is necessary, support opposite gear end of
accessory drive shaft.
INSTALL ACCESSORY DRIVE PULLEY (15) ON ACCESSORY DRIVE SHAFT (2).
INSTALL NEW ACCESSORY DRIVE PULLEY LOCK NUT (16) AND TIGHTEN TO 162-184 LB-FT
(220-250 N.m).
12-116
