TM 9-2320-363-34-2
13. REMOVE CAM/lDLER LASH ADJUSTER (4) AND TIGHTEN LOWER NUT TO 42-49 LB-FT (57-67
N.m).
14. REMOVE GEAR LASH PEDESTAL FROM CAMSHAFT DRIVE GEAR (6).
15. INSTALL WASHER (8) AND BOLT (7). TIGHTEN BOLT TO 75-86 LB-FT (101-116 N.m).
NOTE
Follow-on Maintenance:
Install rocker arm assemblies (page 3-183).
Install bull/idler gear (page 12-93).
Remove engine from repair stand (page 12-3).
12-105
