TM 9-2320-363-34-2
1.
2.
INSTALL HUB (1) ON THREE STUDS (2) IN GEAR HOUSING ASSEMBLY (3). WORD “OUT” (4)
STAMPED ON HUB (1) MUST BE AT TOP AND FACING FORWARD. LUBRICATE HUB (1) AND
ADJUSTABLE IDLER GEAR BUSHING (5) WITH CLEAN ENGINE LUBRICATING OIL.
I
C A U T I O N
I
Two timing marks are on adjustable idler gear. Diamond shaped mark must
aline with diamond mark on camshaft drive gear. Other mark should be
between 5 and 6 o’clock to prevent damage to equipment.
NOTE
Make sure timing marks on adjustable idler gear are facing outward.
ALINE ADJUSTABLE IDLER GEAR DIAMOND TIMING MARK (6) WITH DIAMOND TIMING MARK (7)
ON CAMSHAFT DRIVE GEAR (8) AND INSTALL ADJUSTABLE IDLER GEAR (9) ON HUB (1).
12-101
