TM 9-2320-363-34-2
ADJUSTABLE IDLER GEAR REPLACEMENT (CONT)
3.
INSTALL
DOWN.
4.
INSTALL
5.
INSTALL
RETAINING PLATE (10) ON THREE STUDS (2) WITH RELIEF PORTION OF PLATE (10)
THREE NUTS (11) ON THREE STUDS (2). TIGHTEN TO 42-49 LB-FT (57-67 N.m).
BULL/IDLER GEAR ASSEMBLY (PAGE 12-93).
6.
MEASURE GEAR LASH BETWEEN ADJUSTABLE IDLER GEAR AND BULL/lDLER GEAR
ASSEMBLY. GEAR LASH SHOULD BE 0.001-0.010 IN. (0.025-0.254 mm).
7.
INSTALL GEAR CASE COVER (PAGE 3-116) WITHOUT FAN DRIVE SUPPORT.
8.
MEASURE GEAR LASH BETWEEN ADJUSTABLE IDLER GEAR AND CAMSHAFT DRIVE GEAR.
USING CAM/lDLER LASH ADJUSTER, GEAR LASH SHOULD BE 0.001-0.010 IN. (0.025-0.254 mm).
READING IS ONE-HALF OF ACTUAL MEASUREMENT. MULTIPLY READING BY 2 TO DETERMINE
SPECIFICATION.
12-102
