TM 9-2320-363-34-2
1.
LOOSEN THREE NUTS (1) UNTIL HAND-TIGHT.
2.
INSERT DOWEL PORTION OF CAM/lDLER LASH ADJUSTER (2) IN CENTER HOLE OF RETAINING
PLATE (3).
3.
SECURE ENGINE BARRING TOOL (4) TO BOTTOM OF ACCESS COVER OPENING WITH TWO
ACCESS COVER BOLTS (5). TIGHTEN BOLTS TO 20 LB-FT (28 N.m).
4.
INSTALL CAM/lDLER LASH PEDESTAL IN THREADED HOLE IN LEG OF CAMSHAFT DRIVE GEAR
(6).
NOTE
Make sure dial indicator rests squarely on pedestal flat.
5.
MOUNT DIAL INDICATOR SO STEM OF INDICATOR RESTS ON SCRIBED LINE OF PEDESTAL
FLAT.
6.
REMOVE BOLT (7) AND WASHER (8).
12-103
