TM 9-2320-302-34
0041 00-1
PISTON AND CYLINDER ASSEMBLY MAINTENANCE
0041 00
THIS WORK PACKAGE COVERS
Removal, Inspection, Installation
INITIAL SETUP
Maintenance Level
General Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Compressor, piston ring (Item 22, WP 0126 00)
Gage, profile (Item 36, WP 0126 00)
Gage, profile (Item 38, WP 0126 00)
Guides, connecting rod (Item 44, WP 0126 00)
Pliers, piston ring (Item 85, WP 0126 00)
Press, cylinder liner (Item 91, WP 0126 00)
Protector, piston (Item 93, WP 0126 00)
Puller, mechanical (Item 94, WP 0126 00)
Wrench, torque, 50-250 lb-ft (Item 139, WP 0126 00)
Materials/Parts
Cylinder liner set (P/N 23523948)
Piston ring kit (P/N 23525553)
Cloth, abrasive (Item 9, WP 0125 00)
Compound, international, no. 2 (Item 13, WP 0125 00)
Gage, bearing clearance (Item 20, WP 0125 00)
Oil, lubricating (Item 25, WP 0125 00)
Rags, wiping (Item 31, WP 0125 00)
References
WP 0040 00
Equipment Condition
Engine installed on repair stand
Cylinder head removed (WP 0018 00)
Oil pump removed (WP 0029 00)
REMOVAL
1.
Rotate engine on stand so engine gear case is up.
2.
Bar engine over until connecting rod (1) of cylinder being serviced is at bottom of travel.
1
