TM 9-2320-302-34
0040 00-2
CYLINDER BLOCK PRESSURE TESTING - CONTINUED
0040 00
TESTING - CONTINUED
NOTE
•
Ensure all hose connectors and elbows are removed from block and holes are properly plugged.
•
Ensure all cup plugs and pipe plugs are in place.
•
Ensure all cylinder liners, cylinder liner seal rings, and crevice seals are in place.
2.
From cylinder block pressure test kit, position six test rings (2) on top of cylinder liner flanges. Install two test ring
retaining strips (3).
3.
Install 14 bolts (4) and tighten to 170-175 lb-ft (231-237 Nm).
4.
Position two outside sealing strips (5) on cylinder block (6) with rubber surface against cylinder block. Install 20 bolts
(7) and tighten to 120 lb-in (14 Nm).
5.
Install water manifold cover (8) in oil cooler neck opening (9). Use bolt (10) supplied to secure water manifold cover.
6.
Attach air line to fitting (11) on upper manifold cover.
6
2
5
3
4
7
