TM 9-2320-302-34
0041 00-4
PISTON AND CYLINDER ASSEMBLY MAINTENANCE - CONTINUED
0041 00
REMOVAL - CONTINUED
8.
Repeat procedures in step 2 through 7 for each piston and cylinder being serviced.
NOTE
Piston assembly components should be segregated by cylinder and matchmarked during disassembly to
ensure installation in same position.
9.
Place connecting rod and piston assembly (9) dome side down on workbench.
10.
Remove two piston retaining rings (10) and piston pin (11).
11.
Remove connecting rod (12).
12.
Remove piston skirt (13) from dome (14).
13.
Using piston ring pliers, remove and discard fire (top) and middle compression rings (15), lower oil control ring (16),
and oil control ring expander (17) from piston dome (14).
12
11
10
13
10
14
9
