TM 9-2320-302-34
0041 00-6
PISTON AND CYLINDER ASSEMBLY MAINTENANCE - CONTINUED
0041 00
REMOVAL - CONTINUED
17.
Keep cylinder liner puller shoe (19) in position on cylinder liner bottom and turn cylinder liner puller nut (20) until it
contacts cylinder liner puller thrust bearing (21).
18.
Continue tightening until cylinder liner (3) is free in cylinder block bore.
19.
Remove cylinder liner (3) and cylinder liner puller (18) from block.
20.
Remove cylinder liner (3) from cylinder liner puller (18).
21.
Remove and discard two seal rings (22) and crevice seal (23) from cylinder liner (3).
22.
Repeat procedures in step 16 through 21 for each cylinder liner (3) being serviced.
19
21
20
18
3
23
22
