TM 9-2320-302-34
0019 00-1
GEAR CASE COVER REPLACEMENT
0019 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Dispenser, sealant (Item 30, WP 0126 00)
Guide stud set (Item 43, WP 0126 00)
Trestles (Item 135, WP 0126 00)
Wrench, torque, 15-75 lb-ft (Item 138, WP 0126 00)
Materials/Parts
Ring, seal (P/N 5141452)
Compound, gasket forming (Item 12, WP 0125 00)
Oil, lubricating (Item 25, WP 0125 00)
Straps, tiedown (Item 34, WP 0125 00)
References
TM 9-2320-302-20
Equipment Condition
Alternator removed (TM 9-2320-302-20)
Water pump removed (TM 9-2320-302-20)
Air compressor removed (TM 9-2320-302-20)
Front engine mount adapter removed (WP 0011 00)
Fan drive support removed (WP 0013 00)
Accessory drive removed (WP 0021 00)
Oil pan removed (WP 0028 00)
Power steering pump removed (WP 0086 00)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Procedure may be accomplished in vehicle or on engine stand.
REMOVAL
CAUTION
Use wood blocks on trestles to protect oil pan flange.
1.
Install trestles under each side of oil pan flange.
