TM 9-2320-302-34
0019 00-3
GEAR CASE COVER REPLACEMENT - CONTINUED
0019 00
REMOVAL - CONTINUED
WARNING
Do not slide gear case cover off guide studs. Failure to observe this warning may result in injury to person-
nel or damage to equipment.
10.
Move gear case cover (4) away from gear housing (5) and position lifting sling through camshaft gear cover opening on
gear case cover.
WARNING
Gear case cover weighs 89 lb (40 kg). Attach suitable lifting device prior to removal to prevent possible
injury to personnel.
11.
Secure lifting sling to suitable lifting device. Remove gear case cover (4) from two guide studs (14).
12.
Remove and discard seal ring (20) between bull/idler gear hub recess (21) and gear case cover (4).
13.
Remove two guide studs (14).
14.
Remove all old gasket material from mating surfaces of gear case cover (4) and gear housing (5).
15.
Remove front oil seal (22) from gear case cover (4). Discard seal.
22
4
14
5
21
20
