TM 9-2320-302-34
0019 00-2
GEAR CASE COVER REPLACEMENT - CONTINUED
0019 00
REMOVAL - CONTINUED
2.
Remove two nuts (1) and bolts (2) securing alternator mounting bracket (3) on gear case cover (4) and gear housing (5).
3.
Remove and discard tiedown straps (6), as required, securing fan clutch solenoid air line (7) and move air line away
from gear case cover (4) and gear housing (5).
4.
Remove bolt (8) from standoff bracket (9) and gear case cover (4). Move standoff bracket away from gear case cover.
5.
Remove nut (10), bolt (11), and standoff bracket (12) from gear case cover (4). Move standoff bracket away from gear
case cover.
6.
Remove two bolts (13) from opposite sides of gear case cover (4). Replace two bolts (13) with guide studs (14).
7.
Remove five bolts (15) from camshaft gear cover (16).
8.
Remove camshaft gear cover (16) and gasket (17) from gear case cover (4).
NOTE
Different length bolts are used to secure gear case cover to gear housing. Note location of long and short
bolts as an aid for use in installation.
9.
Remove ten short bolts (18) and four long bolts (19).
2
3
1
15
16
17
9
8
4
5
18
6
10
12
13
14
11
18
19
7
14
18
6
18
6
18
