TM 9-2320-302-34
0018 00-7
CYLINDER HEAD REPLACEMENT - CONTINUED
0018 00
INSTALLATION - CONTINUED
13.
Finally tighten 38 cylinder head bolts (15) to same torque and sequence as in step 12.
14.
Install bracket (14) on cylinder head (3) and install two bolts (11). Tighten bolts to 43-54 lb-ft (58-73 Nm).
15.
Install bolt (13) through gear case cover and housing assembly and install nut (12). Tighten nut to 43-54 lb-ft (58-73
Nm).
16.
Connect air compressor hose (9) with clamp (10) to cylinder head (3).
17.
Position wiring harness (8) in place and install two washers (7) and bolts (6).
18.
Position bracket (5) in place and install bolt (4).
3
10
9
7
8
6
5
4
