TM 9-2320-302-34
0019 00-6
GEAR CASE COVER REPLACEMENT - CONTINUED
0019 00
INSTALLATION - CONTINUED
13.
Tighten bolts to 43-54 lb-ft (58-73 Nm), in sequence shown.
14.
Position alternator mounting bracket (3) on gear case cover (4) and gear housing assembly (5). Secure with two bolts (2)
and nuts (1). Tighten to 43-54 lb-ft (58-73 Nm).
15.
Install new gasket (17) and camshaft gear cover (16) on gear case cover (4).
16.
Install five bolts (15) to secure camshaft gear cover (16). Tighten bolts to 22-28 lb-ft (30-38 Nm).
17.
Install power steering pump (WP 0086 00).
18.
Install oil pan (WP 0028 00).
19.
Install accessory drive (WP 0021 00).
20.
Install fan drive support (WP 0013 00).
10
11
12
13
14
16
3
1
18
2
4
17
5
6
7
8
9
15
TIGHTENING SEQUENCE
2
3
1
5
4
15
16
17
