TM 5-2330-325-13&P
0054
REMOVAL
1.
Using a suitable lifting device (Figure 1, Item 1) appropriately raised to contact equalizing beam, lift
equalizing beam approximately 3 in. (76.2 mm) and place a suitable support (Figure 1, Item 2) under
equalizing beam. Lower beam to rest on suitable support.
2.
Repeat Step 1 for opposite equalizing beam but leave the suitable support in position as a
secondary support.
1
2
466-0050
Figure 1.
Raise and Support Equalizing Beam.
3.
Position a suitable lifting device under balance point of axle and raise until suitable lifting device comes in
contact with axle.
