TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
IN-CAB COMPONENTS - CONTINUED
0003 00
e.
Install decal (13) on switch plate (9).
f.
Install switch plate (9) and retaining nut (10) on threaded shaft (7) on front of dash panel (8).
g.
Tighten retaining nut (10) to hold switch (5) firmly to dash panel (8) and align switch plate (9) parallel to controls
above and below.
WARN I N G
Always wear gloves and goggles when drilling. Failure to follow this warning may result in injury to person-
nel.
h.
Drill four 1/8-inch diameter holes in dash panel (8) using the four holes in the corners of the switch plate (9) as a
template.
i.
Install switch plate (9) with four rivets (11) using rivet tool.
j.
Re-tighten retaining nut (10).
k.
Install knob (12) on end of threaded shaft (7), aligning the "D" on knob with the shape of switch shank (14).
449-110
2.
A/C Relay Installation.
WARN I N G
Always wear gloves and goggles when drilling and grinding. Failure to follow this warning may result in
injury to personnel.
N OT E
Refer to WP 0057 00 for template of A/C
relay mounting location.
a.
Drill two 9/32-inch-diameter holes (1) in the
dash panel (2) as shown on template.
b.
Install relay (3) on back of dash panel (2) with
two screws (4) and locknuts (5), provided with
the kit.
HETF00367
0003 00-14