TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
IN-CAB COMPONENTS - CONTINUED
0003 00
WARN I N G
Always wear gloves and goggles when drilling and grinding. Failure to follow this warning may cause
injury to personnel.
l.
Modify doghouse floor mat.
(1)
Using template (WP 0057 00, Doghouse Floor Mat Template), locate and mark four 7/8-inch holes (13)
and one 3-inch hole (14) on doghouse floor mat (15).
(2)
Drill five 1/16-inch pilot holes at loca-
tions marked.
(3)
Drill four 7/8-inch diameter holes (13)
for evaporator drain holes.
(4)
Drill one 3-inch hole (14) at location
marked.
(5)
Cut doghouse floor mat (15) as shown
on template.
HETF00377
N OT E
Do not remove front engine access panel on an armored vehicle.
m.
Modify doghouse front engine access panel.
C AU T I O N
Use caution when drilling and check for components behind panel. Failure to follow this caution may cause
damage to vehicle.
0003 00-17