TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
UNDER-HOOD COMPONENTS - CONTINUED
(2)
Install upper compressor/fuel filter support (4) with two screws (5), lockwashers (6), screws (7), and lock-
nuts (8), provided in kit.
HETF00356
e.
Install compressor on swing bracket.
N OT E
The compressor intake/exhaust ports are rotated during shipping to minimize damage.
(1)
Loosen screw (13) and rotate compres-
sor intake/exhaust ports (14) 180.
(2)
Install compressor (9) on swing bracket
(10) with four screws (11) and locknuts
(12), provided with the kit.
449-106
N OT E
Do not tighten swing bracket screws until drive belt is adjusted.
f.
Install compressor and swing bracket.
(1)
Install compressor (9) and swing bracket (10) to upper compressor/fuel filter support (4) with three screws
(13), washers (14), and locknuts (15), provided with the kit. Do not tighten locknuts.
0003 00-10