TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
UNDER-HOOD COMPONENTS - CONTINUED
449-107
N OT E
Alignment of the compressor clutch pulley and compressor drive pulley can be checked by using a straight-
edge placed on both pulleys. If necessary for alignment, shim the compressor with shims provided, to align
the pulleys.
(2)
Align compressor clutch pulley (16) and compressor drive pulley (17).
(3)
If necessary, use shims (18) on compressor (9) to align pulleys (16 and 17).
(4)
Using a belt-tightening gage, tighten the compressor drive belt (19) to 98 lb (133 N).
(5)
Tighten swing bracket screws (13).
(6)
Tighten screw (7) on upper and lower compressor/fuel filter supports (1 and 4).
449-108
0003 00-11