TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
IN-CAB COMPONENTS - CONTINUED
0003 00
WARN I N G
Always wear gloves and goggles when drilling and grinding. Failure to follow this warning may result in
injury to personnel.
C AU T I O N
Before drilling holes, ensure all electrical wires are out of the way. Failure to follow this caution may result
in damage to equipment.
N OT E
Refer to WP 0057 00 for template of A/C control switch mounting location.
a.
Drill a pilot hole (3) in location shown to ensure no components will be damaged when drilling mounting hole.
b.
Drill a 7/16-inch diameter hole (4) in location shown on template.
449-113
N OT E
Ensure threaded shaft extends out of dash panel far enough to allow for the installation of the switch plate
and outside retaining nut.
c.
Install switch (5) in hole (4) with retaining nut (6) on threaded shaft (7) behind dash panel (8).
d.
Position flat side of switch facing to the right.
449-114
0003 00-13