TB 2300-420-20-1
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (FRONT ONLY OF TWO-PIECE)-Continued
6. Using 1/2 inch socket, remove screw (P) washer
(Q) and clamp (R) that secure control assembly
(L) to hull wall.
7. Using screwdriver, remove four screws (S) and
four washers (T) securing retainer (U) and
control assembly (L) to bulkhead.
Sliding
retainer (U) forward on control assembly (L)
away from bulkhead.
8. Grasp control assembly (L) with both hands and
move about 1 inch toward front of tank. Remove
split bushing (V) and throw it away.
TA173274
36