TB 2300-420-20-1
PARKING BRAKE*CONTROL ASSEMBLY REPLACEMENT (FRONT ONLY OF TWO-PIECE)- Continued
7. At bulkhead, position new split bushing (H) on
control assembly (A). Apply sealing compound.
Allow 20 minutes to dry, then put bushing into
bulkhead.
8. Using screwdriver, secure retainer (J) to
bulkhead with four screws (K) and four washers
(L).
9. Position lamp (M) over control assembly (A). Using 1/2 inch socket, secure to hull with screw (N) and washer (P).
TA173279
41