TB 2300-420-20-1
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (ONE-PIECE) - Continued
13. Position connector (N) in bellcrank (P).
NOTE
Pin and clip securing connector (N) to bellcrank (P) need not be installed until adjustment
procedure is performed.
14. Using a 9/16 inch socket and extension, install
two screws (Q), washers (R), and support
bracket (H) to bracket assembly.
15. At hull wall, install clamp (S) around casing of
control assembly (B).
16. Using 7/16 inch combination wrench, install
lockwasher (T) and screw (U).
TA173269
31