TM 9-2320-363-34-2
REAR COVER AND FIRST CLUTCH REPLACEMENT AND REPAIR (CONT)
3.
4.
5.
6.
7.
8.
PRESS EVENLY ON FIRST CLUTCH PISTON (3) WITH 100 PSI (689.5 kPa).
MEASURE DISTANCE FROM BASE OF CLUTCH PACK (4) TO THRUST PAD (5).
CLUTCH PACK THICKNESS MUST BE 2.521-2 553 IN. (64.03-64.85 mm). REPLACE CLUTCH
PLATE(S) (1 AND 2) AS NEEDED TO ENSURE PROPER CLUTCH PACK THICKNESS.
MEASURE THICKNESS OF ONE TANG (6) ON EACH OF SEVEN STEEL PLATES (1). IF STEEL
PLATE MEASURES 0.116-0.123 IN. (2.95-3.12 mm), STEEL PLATE IS THICK. IF STEEL PLATE
MEASURES 0.099-0.106 IN. (2.51-2.69 mm), STEEL PLATE IS THIN.
REPEAT STEPS 1 THRU 5 TO RECHECK CLUTCH PACK THICKNESS.
REMOVE FIRST CLUTCH PISTON (3) AND CLUTCH PACK (4) FROM PRESS.
14-140
