TM 9-2320-363-34-2
REAR COVER AND FIRST CLUTCH REPLACEMENT AND REPAIR (CONT)
4.
POSITION REAR COVER (1) ON SIDE, USING WOODEN BLOCK FOR SUPPORT.
5.
REMOVE OUTPUT SHAFT (7) FROM REAR COVER (1).
6.
PRESS OUTPUT SHAFT (7) FROM BEARING (8), SPACER (9), AND SPEEDOMETER DRIVE GEAR (10).
7.
REMOVE BUSHING (11) FROM OUTPUT SHAFT (7).
8.
SCREW LONG SCREW (12) INTO SMALL ORIFICE PLUG (13). IF DAMAGED, PRY UP ON SCREW
(12) TO REMOVE PLUG (13).
14-136
