TM 9-2320-363-34-2
REAR COVER AND FIRST CLUTCH REPLACEMENT AND REPAIR (CONT)
INSTALLATION
1.
2.
3.
4.
SOAK SIX FRICTION PLATES (1) IN CLEAN LUBRICATING OIL FOR AT LEAST 2 MINUTES.
NOTE
Thick steel clutch plates must be installed on top of stack for proper pressure
distribution.
INSTALL 10 CLUTCH PLATES (1 AND 2) IN TRANSMISSION HOUSING (3) STARTING WITH STEEL
PLATE (2) AND ALTERNATING WITH FRICTION PLATE (1) UNTIL FULLY SEATED.
INSTALL REAR PLANETARY RING GEAR (4) IN TRANSMISSION HOUSING (3).
INSTALL THREE CLUTCH PLATES (1 AND 2) IN TRANSMISSION HOUSING (3) STARTING WITH
STEEL PLATE (2) AND ALTERNATING WITH FRICTION PLATE (1).
14-144
