TM 9-2320-363-34-2
NOTE
Gear on torque converter turbine must be lined up with teeth of lockup clutch
plate before installing.
15. INSTALL TORQUE CONVERTER TURBINE (19) ON FLYWHEEL (11).
1.
2.
3.
4.
5.
INSTALL LIFTING BRACKET (1) WITH TWO SCREWS (2) AND TWO WASHERS (3).
COAT NEW TURBINE SHAFT SEAL RING (4) AND NEW CONVERTER SEAL RING (5) WITH
LUBRICATING OIL.
INSTALL TURBINE SHAFT SEAL RING (4) IN GROOVE AND SNAP ENDS TOGETHER.
INSTALL CONVERTER SEAL RING (5) ON TORQUE CONVERTER PUMP (6).
COAT TORQUE CONVERTER THRUST PADS (7) WITH LUBRICATING OIL.
14-19
