TM 9-2320-363-34-2
FLYWHEEL AND TURBINE REPLACEMENT AND REPAIR (CONT)
9.
REMOVE AND DISCARD SEAL RING (7) FROM OUTER GROOVE IN PISTON (6).
10.
11.
12.
13.
REMOVE AND DISCARD SEAL RING (8) FROM OUTER GROOVE IN HUB (9).
SET TORQUE CONVERTER TURBINE (2) ON WORK SURFACE WITH BEARING SHAFT (10) UP.
REMOVE BEARING (1) FROM BEARING SHAFT (10).
IF TEETH ON RING GEAR (12) ARE WORN OR CHIPPED, REMOVE RING GEAR (12) FROM
FLYWHEEL (13).
Use general cleaning methods to clean all parts (page 2-30).
14-14
