TM 9-2320-363-34-2
1.
HOLD RIM OF STATOR (1) ON WORK SURFACE.
2.
TURNING ROLLER RACE (2) CLOCKWISE, SLOWLY REMOVE ROLLER RACE (2) FROM STATOR
(1).
3.
REMOVE 10 ROLLER SPRINGS (3) AND 10 ROLLERS (4) FROM STATOR (1).
4.
REMOVE ROLLER BEARING (5) AND THRUST BEARING RACE (6) FROM STATOR (1).
Use general cleaning methods to clean all parts (page 2-30).
Inspect stator and cam for cracks and rivet holes for burrs or swelling. If stator or cam is cracked or
distorted, replace stator.
Use general repair methods to repair damaged parts (page 2-33).
14-23
