TM 9-2320-363-34-2
1.
MEASURE THICKNESS OF LOCKUP CLUTCH PLATE (1). REPLACE IF LESS THAN 0.19-IN.
(4.8-mm) THICK.
2.
IF INSIDE OF FLYWHEEL (2) IS GROOVED, REPLACE FLYWHEEL (2) AND BACKPLATE (3).
3.
PLACE STRAIGHTEDGE ON BACKPLATE (3).
4.
IF FEELER GAGE LARGER THAN 0.010 IN. (0.25 mm) WILL FIT UNDER STRAIGHTEDGE,
REPLACE BACKPLATE (3).
5.
PLACE STRAIGHTEDGE ON PISTON (4).
&
IF FEELER GAGE LARGER THAN 0.010 IN. (0.25 mm) WILL FIT UNDER STRAIGHTEDGE,
REPLACE PISTON (4).
Use general repair methods to repair damaged parts (page 2-33).
14-15
