TM 9-2320-363-34-2
FLYWHEEL AND TURBINE REPLACEMENT AND REPAIR (CONT)
1.
2.
3.
4.
5.
6.
IF REMOVED, INSTALL NEW RING GEAR (1) ON FLYWHEEL (2).
COAT BEARING SHAFT (3) AND BEARING (4) WITH LUBRICATING OIL.
SEAT BEARING (4) ON BEARING SHAFT (3) WITH IDENTIFICATION NUMBER UP.
PRESS BEARING (4) ON BEARING SHAFT (3).
COAT OUTSIDE OF HUB (5) WITH LUBRICATING OIL.
APPLY LUBRICATING OIL TO NEW SEAL RING (6) AND INSTALL SEAL RING (6) IN OUTER
GROOVE ON HUB (5).
7.
APPLY LUBRICATING OIL TO OUTER GROOVE OF PISTON (7).
8.
APPLY LUBRICATING OIL TO NEW SEAL RING (8) AND INSTALL SEAL RING (8).
14-16
