TM 9-2320-363-34-2
FLYWHEEL AND TURBINE REPLACEMENT AND REPAIR (CONT)
6.
INSTALL LIFTING DEVICE ON LIFTING BRACKET(l).
7.
ALINE AND INSTALL FLYWHEEL (8) SO FLYWHEEL FITS FLUSH AGAINST TORQUE CONVERTER
PUMP (6).
8.
INSTALL ONE SCREW (9) AND ONE WASHER (10) THRU HOLE (11) IN FLYWHEEL (8) AND
TIGHTEN SCREW UNTIL SNUG.
9.
REMOVE LIFTING DEVICE FROM LIFTING BRACKET (1).
NOTE
Use flywheel lifting bracket to turn flywheel for access to screw holes inside
converter housing.
10. INSTALL 29 SCREWS (9) AND 29 WASHERS (10) THRU HOLES (11) IN FLYWHEEL (8) AND
TIGHTEN SCREWS UNTIL SNUG.
14-20
