TM 9-2320-363-34-2
WATER PUMP REPAIR (CONT)
1
3.
APPLY THIN FILM OF CLEAN ENGINE LUBRICATING OIL TO OUTSIDE DIAMETER OF NEW OIL
SEAL (6) AND WATER PUMP HOUSING BORE (7).
4.
SUPPORT WATER PUMP HOUSING (8) ON PRESS BED, IMPELLER SIDE DOWN. USING SMALL
END OF SERVICE SET BEARING AND SEAL INSTALLER (5), PRESS OIL SEAL IN WATER PUMP
HOUSING BORE (7). REMOVE BEARING AND SEAL INSTALLER (5).
12-196
