TM9-2320-363-34-2
W A R N I N G
Water pump cover snap ring is strong. Wear adequate face and eye protection
during removal to prevent personal injury.
1.
REMOVE DRAINCOCK (1) (M915A2 AND M916A1) OR PLUG (1.1) (ALL EXCEPT M915A2 AND
M916A1), PIPE PLUGS (2) IF INSTALLED, SNAP RING (3), COVER (4), AND SEAL RING (5) FROM
WATER PUMP HOUSING (6). DISCARD SEAL RING.
2.
HOLD SQUARE END OF WATER PUMP SHAFT (7) WITH SERVICE SET SOCKET (8) AND REMOVE
RETAINING BOLT (9) AND WASHER (10).
Change 1
12-191
