TM 9-2320-363-34-2
WATER PUMP REPAIR (CONT)
8.
9.
10.
11.
PLACE SERVICE SET HOLDING FIXTURE (1) ON PRESS BED. INSTALL EXTENSION TOOL (12) IN
HOLDING FIXTURE IN CONTACT WITH ADJUSTING WHEEL (13).
NOTE
Make sure water pump shaft is supported when water pump components are
being assembled.
TURN WATER PUMP HOUSING (8), GEAR SIDE DOWN.
POSITION WATER PUMP SHAFT (3) OVER EXTENSION TOOL (12) IN HOLDING FIXTURE (1).
TURN ADJUSTING WHEEL (13) UNTIL EXTENSION TOOL (12) CONTACTS WATER PUMP SHAFT
(3) FOR SUPPORT.
12-198
