TM 9-2320-363-34-1
OIL PUMP REPLACEMENT AND REPAIR (CONT)
1.
2.
POSITION OIL PUMP ASSEMBLY (1) ON CYLINDER BLOCK (2) WITH OIL PUMP DRIVE GEAR (3)
ENGAGED WITH CRANKSHAFT GEAR (4). MAKE SURE RING DOWEL AND DIAMOND DOWEL
ARE FULLY SEATED IN CYLINDER BLOCK (2).
INSTALL TWO LONGER BOLTS (5) IN FRONT BOLT HOLES AND TWO SHORTER BOLTS (6) IN
REAR BOLT HOLES IN OIL PUMP ASSEMBLY (1). TIGHTEN BOLTS TO 43-54 LB-FT (58-73 N.m)
IN CRISSCROSS PATTERN.
3-212
